|
Axe Brackets
 ZSMA5201
Chrome plated axe handle bracket. Spring loaded clip will
hold an axe handle snuggly. Comes with gasket.
ZAH5101C
Chrome plated axe blade holder. This bracket holds the
blade of either a pickhead or flathead axe when it is mounted horizontally.
Comes with gasket
RELAB
Treadplate axe head cover. To cover the entire head of a
pickhead or flat head axe when mounted with the handle pointed up.
 CHR55Z01C
Chrome plated bracket set to hold a straight pry bar. Comes
with gasket set.
M-10, M-15, M-25, M-40, M-45, M-50, M-60
Threaded bases with male threads. Great to hold down
nozzles and adapters so they don't get misplaced or beat up from rattling around
in a compartment.
 QL-48Z1.5 &
QL-48Z2.5
Made of die cast zinc, this quick
release equipment holder is available in 1.5" and 2.5" thread sizes. Chrome
finish. Furnished with body gasket.
EN30032, EN10011, EN50050
Quick Fist clamps. QUICK FIST Clamps are made in the USA of heavy
duty transportation grade rubber and are not affected by hot or cold climates or
salt. The rubber is also UV resistant.
EN30032 - Holds objects from 5/8" to 1 3/8" in diameter.
EN10011 - Holds objects 1" to 2 1/4" in diameter.
EN50050 - Holds objects 2.75” to 3.50” in diameter .
EN20022
Super Quick Fist clamp. Holds objects 2
1/2" to 9 1/2" (64mm to 240mm) in diameter. QUICK
FIST Clamps are made in the USA of heavy duty transportation grade rubber and
are not affected by hot or cold climates or salt. The rubber is also UV
resistant.
EN60022
XL Quick Fist Clamp. QUICK FIST Clamps are made in the USA of heavy duty
transportation grade rubber and are not affected by hot or cold climates or
salt. The rubber is also UV resistant.
Holds round objects up to 15” in diameter. Holds tools and equipment measuring
up to 30” in linear distance. Each clamp set supports a safe working load of
150lbs, with a break-strength of 300lbs. Each base of the clamp mounts with four
#10 screws or bolts (not included).
PR61Z-1C
Chrome plated pike pole ring. For quick access to a pike pole you can
slide the handle end into this ring and secure the pike end with a clamp.
FBP58Z01C & FBP58Z02C
Chrome plated pike pole handle bracket.
FBP58Z01C for 1-1/2" diameter handles.
FBP58Z02C for 1-1/4" diameter handles.
PPBK & PPBK-LG
These mounting clips are designed for pike poles but will work for much more.
They are stainless steel with a plastisol coating to protect your equipment.
The PPBK clip is designed for the slim line fiberglass pike pole handles.
The PPBK-LG clip is designed for the larger fiberglass and wood handles.
| 
