Fire Hog Structural Firefighting Gloves

Eversoft cowhide leather, fire retardant, heat resistant 3.5 oz. to 4.0 oz. palm tanned to meet NFPA flame test with additives to stay soft and low water absorbance when wet repeatedly. 

A girdle is sewn into palm for positive grip and extended wear for thumb area. Welts are sewn into the middle and ring fingers for extra seam strength.

Flexor, smooth grain cow leather 3.5 oz. to 4.0 oz. back with a knuckle band sewn across knuckles give a layer of extra protection with a 60+ TPP rating.

A double layer of soft 6 oz. FR modacrylic no melt no drip liner for a smooth inside feel and heat protection to the back of hand.

A leather cuff is sewn inside wrist opening over liner for extended wear of liner and smoother donning.

Exclusive breathable adhesive is coated over entire finger, thumb and palm area, ensuring full liner/barrier/glove bonding.

The Pyrotect Barricade moisture barrier is 3 mil. breathable 100 % water proof, protects from viral, chemical penetration and blood borne pathogens extends full length of glove for full protection.

Nomex 4 wristlet close fitting cuff to prevent embers or sharp debris entry extending not less than 2 inches beyond wrist crease with elastic sewn on back to wrist area.

Gauntlet style has smooth grain all leather 1 inch cuff hemmed over top of glove. Elastic is sewn to wrist crease on back and palm for close fitting cuff.

This glove meets NFPA standards and is SEI certified.

This glove is NFPA 1971-2013 by the Safety Equipment Institute (SEI).


  • Eversoft cowhide leather , fire retardant, heat resistant 3.50 to 4.0 oz. leather  tanned with additives to stay soft and low water absorbance when soaked repeatedly. Meets NFPA flame test.
  • Flexor, smooth grain cow leather 3.5 oz. to 4.0 oz. back with 60+ TPP rating.
  • Exclusive breathable adhesive for glove bonding.
  • Pryotect Barricade 3 mil. Barrier 100% waterproof, viral/chemical penetration and blood borne pathogens.
  • Nomex 4 wristlet cuff with leather pull patch.
  • Meets NFPA 1971-2013 standards and is SEI certified.
  • Proudly made in the USA with highly skilled employees.

1-800-264-0017  Call us today!

Copyright 2006 David's Fire Equipment
Last modified: 03/27/12